top of page
PUMPSET
NOVATHERM Pump Set
Manifold with Pressure Gauge and Auto Air Vent
The NovaTherm premium stainless-steel manifold is a
preassembled unit for use within either underfloor heating
systems or with wall hung radiator systems.
Key Features:
The unit is preassembled, complete with an auto air vent
(AAV), 10 bar pressure gauge, flow metes with 0-5 l/m
indicators and fill and drain valves. Compatible with various
pipe sizes up to 20mm. Integrated filling and drain off valves
ease long term maintenance.
Our manifold has a standard UK distance of 210mm between the flow and return bars. This makes the
unit versatile with various mixing units. The unit has spacing of 50mm between each port from the
centre point. This enables various pipe sizes and materials to be installed. For ease of installation we
recommend no larger than 20mm pipe to be installed with the NovaTherm manifold connectors. The
unit has 1” threaded inlets to house isolation valves. We recommend when installing with the NovaTherm
mixing unit that a captive universal nut is used for fixing. The bottom rail has a modulating pin that can
be either manually adjust with the white adjusting caps, or to achieve electronic control an actuator can
be installed.
The NovaTherm premium stainless-steel manifold is a
preassembled unit for use within either underfloor heating
systems or with wall hung radiator systems.
Key Features:
The unit is preassembled, complete with an auto air vent
(AAV), 10 bar pressure gauge, flow metes with 0-5 l/m
indicators and fill and drain valves. Compatible with various
pipe sizes up to 20mm. Integrated filling and drain off valves
ease long term maintenance.
Our manifold has a standard UK distance of 210mm between the flow and return bars. This makes the
unit versatile with various mixing units. The unit has spacing of 50mm between each port from the
centre point. This enables various pipe sizes and materials to be installed. For ease of installation we
recommend no larger than 20mm pipe to be installed with the NovaTherm manifold connectors. The
unit has 1” threaded inlets to house isolation valves. We recommend when installing with the NovaTherm
mixing unit that a captive universal nut is used for fixing. The bottom rail has a modulating pin that can
be either manually adjust with the white adjusting caps, or to achieve electronic control an actuator can
be installed.
IVAR Unimix C Pumpset
500897 Includes standard pump
500897E Includes variable-speed pump
500897WP Without pump
500897E Includes variable-speed pump
500897WP Without pump
bottom of page